License Plate Accessories

Product

Quantity

#14 Nylon Insert
4864

#14 nylon license plate screw insert; fits a corresponding #14 screw. Packaged 100 inserts per box; priced per box below:

$9.90

6mm x 16mm Slotted Hex Head License Plate Screw
4863

6mm x 16mm slotted hex head license plate screw. Packaged 100 screws per box; priced per box below:
$19.02

Bar Magnets w/ Screws
4851

An 8" channel holds three magnets, which hold the plate onto any metal surface of the vehicle. The entire assembly is coated with a baked-on poly finish with 2 sturdy lock nuts. Packaged per holder; priced per holder below:

$13.20

Bar Magnets w/ Screws and Blue PVC Coating
4853

An 8" channel holds three magnets, which hold the plate onto any metal surface of the vehicle. The entire assembly is coated with blue PVC and includes 2 sturdy lock nuts. Packaged per holder; priced per holder below:

$12.12

Blank Moisten & Seal License Plate Envelopes (Form #LPEV-1)
831

Moisten & Seal License Plate Envelopes; license plates fit perfectly inside! Packaged 100 envelopes per box; priced per box below:

1-4 $41
5-9 $38
10-19 $35
20-39 $32

Blank Self Sealing License Plate Envelopes (Form #LPEV-1)
832

Self Sealing License Plate Envelopes; license plates fit perfectly inside! Packaged 100 envelopes per box; priced per box below:

1-4 $44
5-9 $41
10-19 $38
20-39 $34

Custom License Plate Badges
4559

These raised-letter badges are very cost effective and environmentally friendly, using less material in manufacturing than full license plate frames.

Contact us for customization options

DEM-O Jiffy License Plate Holder
4850

The DEM-O Jiffy License Plate Holder is made of neoprene and is secured strongly in the trunk, hood, or rear window by knobs on the back of the straps. The double neoprene holder securely surrounds, holds, and protects the license plate from wear and rust. Will not scratch paint. Packaged per holder; priced per holder below:

$19.30

Duo-Drive Truss Head License Plate Screw
4865-05

#14 duo-drive truss head screw; dipped in dacromet for rust resistance and strength. Packaged 50 screws per box; priced per box below:
$12.07

Extruded Rubber Coated Bar Magnet w/ Screws
4855

This magnet provides more protection to the vehicle, same holding power, no cloth tape to wear out and NO metal to scratch the car. High quality hardware included. Packaged per holder; priced per holder below:

$14.26

Hex Flange Head (Zinc Plated) 6mm x 12 mm
4865-15

Hex Flange Head (Zinc Plated) 100 per box
$11.26

Metric Thumb Screw for License Plates
4861

Metric thumb screw for license plates. Packaged 25 screws per box; priced per box below:

$12.27

Phillips Hex Washer Head License Plate Screw
4865-01

#14 Phillips hex washer head screw; dipped in zinc and yellow dicromate for rust resistance and strength. Packaged 50 screws per box; priced per box below:

$9.90

Preprinted Moisten & Seal License Plate Envelopes (Form #LPEV-1)
8312

Moisten & Seal License Plate Envelopes preprinted with lines for customer to write in their address and return address. License plates fit perfectly inside! Packaged 100 envelopes per box; priced per box below:

1-4 $47
5-9 $43
10-19 $40
20-39 $36

Preprinted Self Sealing License Plate Envelopes (Form #LPEV-1)
8322

Self Sealing License Plate Envelopes preprinted with lines for customer to write in their address and return address. License plates fit perfectly inside! Packaged 100 envelopes per box; priced per box below:

1-4 $50
5-9 $46
10-19 $43
20-39 $39

Slotted Hex Washer Head Black E-Coat
4865-13

Slotted Hex Washer Head - Black E-Coat 100 per box
$10.20

Slotted Hex Washer Head License Plate Screw
4865-07

#14 slotted hex washer head screw; dipped in black e-coat for rust resistance and strength. Packaged 50 screws per box; priced per box below:
$13

Slotted Hex Washer Head License Plate Screw
4865-03

Slotted hex washer head screw; dipped in zinc for rust resistance and strength. Packaged 50 screws per box; priced per box below:

$10.39

Slotted Pan Head License Plate Screw
4865-09

Slotted pan head screw; dipped in zinc for rust resistance and strength. Packaged 50 screws per box; priced per box below:

$8.67

Slotted Truss Head -#14 x 3/4
4865-11

Slotted Truss Head - Black E-Coat 100 per box
$9.84

Temporary Tag Bag
835

Inexpensive, but effective. These Temporary Tag Bags are sure to keep your temporary tags dry and legible, keeping both you and your customer legal. At 15" in width, users can fold the end of the bag over to ensure that the tag will not get wet. Packaged 100 bags per pack; priced per pack below:

1-4 $13
5-9 $12.50
10-19 $12

Temporary Tag Bag with Adhesive Seal
835-01

This Temporary Tag Bag is specially designed to hold temporary tags or other types of in-transit permits. The adhesive strip across the top seals the tag inside. Attach to the rear plate mount using the license plate holes or stick it to the rear window of the vehicle using the 2 additional adhesive strips. Packaged 100 per pack; priced per pack below:
1-4 $31
5-9 $30.50
10-19 $30

Temporary Tag Protector (Form #TH-100)
834

Protect your customers' temporary tags with the best! Give them this heavy duty Temporary Tag Protector to use until their permanent plates are issued! Packaged 100 protectors per box; priced per box below:

1-4 $155
5-9 $148
10-19 $145

The TAG BAG License Plate Holder
4852

The TAG BAG License Plate Holder quickly and easily displays a license plate for a test drive! Packaged per holder; priced per holder below:

$13.20

Thumb Screw American 1-1/8 x 7/8
4860

Thumb Screw American 1 1/8 x 7/8 - 50 per box
$12.56

Product Catalog